סופר גלו איכותי 20 גרם בבקבוק חזק במיוחד PRATLEY

INSTRUCTIONS
The cap is supplied with a tear-off safety collar
and a built-in piercing pin. To open:
1.Tear off the safety collar.
2.Push down the cap until the pin pierces the
nozzle.

• Ensure that the bonding surfaces are:
a) A good fit (Superglue cannot fill bond gaps).
b) Non-absorbent. (Will not work on absorbent
surfaces such as clay pots.)
• USE ONLY ONE DROP per square cm.
• Do not spread the drop, let this occur naturally
when the two surfaces are brought together .
(Good results can sometimes be obtained by
placing the dry surfaces together and then
applying the adhesive to the joint line so that it
"wicks" in.)
• A handling bond will develop within seconds.
However, for best results wait about ±20
minutes before using.
•Wipe the tip with a dry tissue before closing.

• A handling bond in ±30 seconds.
• Full strength ±20 minutes.
• Setting time is very dependant upon the
 materials being bonded and atmospheric
 humidity. (Low humidity will slow down the
 setting time.)