מערכת כליבה מקצועית לפלטות פורטון

Glue-up large or small panels with great looking, professional results every time with the Panel Max & Panel Max XL Glue Press System. The Panel Max makes stronger, more uniform joints than standard pipe or bar clamps. Unlike pipe or bar clamps, which tend to over-tighten on the bar side, The Panel Max applies even, uniform pressure to the stock surface since it completely surrounds the work piece, which creates superior quality joints with less hassle. This system also cuts the surface area required for glue-ups down about 90% since it is mounted vertically to any wall in your shop and stays out of your way while the stock is drying. When considering purchasing wide boards consider this; wide stock pieces cost more and tend to warp when purchased from a store or lumber yard; with the Panel Max Glue Press you can glue up a series of narrow boards to produce wide, warp-resistant panels for much less money. The Panel Max also aligns your boards better than standard clamps, resulting in your panels gluing up flat which will require less planing and surfacing. You can also add or remove clamp rails easily by sliding them out of the rails.

The Panel Max system includes:

• 3 each of the 43" clamps and hardware.
• 1 each of the 39" mounting rails.
• With one system you can glue panels up to:
  • 37" Tall x 48" Wide x 5" Thick
  • (3" Recommended Thickness)